Oh man, I am sooo hyped for the Z Fold 7 too! Based on my experience with the current Fold lineup, you've definitely gotta look for chargers that support PPS (Programmable Power Supply) at 5A to hit that Super Fast Charging 2.0 speed. Basically, if the brick doesn't have PPS, it'll just turtle along at 15W or 25W, which is literally the worst when you're in a rush, right?

I've been using third-party stuff for a while and honestly, they're fantastic. Here is what I recommend for that top-tier 45W speed:

* Anker 713 Charger Nano II 45W - This thing is tiny and handles PPS like a champ.
* Samsung 45W USB-C Fast Charging Wall Charger EP-T4510 - The official one is always a safe bet if you want zero compatibility stress.
* UGREEN Nexode 65W USB C GaN Charger 3-Port - I use this one cuz it handles my Fold and my buds at the same time.

Just make sure you use a 5A rated cable too, otherwise it wont hit the max speed anyway! idk for sure if Samsung will finally bump it past 45W this year but I highkey doubt it... gl!

Sooo I’ve been obsessing over the power delivery specs for the new Fold, and honestly, safety and thermal management are the biggest deals here! You don't want to fry your expensive new toy with a cheap brick. For your situation, I've had *amazing* results with the Anker 735 Charger (GaNPrime 65W). It’s super reliable because of the ActiveShield 2.0 tech that checks temps like millions of times a day!

Another fantastic choice for safety-first charging is the UGREEN Nexode 45W Dual USB C GaN Charger. It literally handles the PPS 2.0 protocol perfectly and stays way cooler than the official Samsung ones iirc. Basically, just make sure you’re using a high-quality Anker 543 USB-C to USB-C Cable (Bio-Braided 140W) to ensure the E-marker chip communicates correctly with the PPS logic. It’s all about that stable voltage flow to protect the battery longevity!! good luck 👍

Just catching up on this thread and there is some solid advice here about cables and 5A ratings. To summarize what everyone has mentioned: you definitely need PPS support and a proper E-marked cable or you are basically stuck at 25W. From a technical standpoint, the reason you want a high-quality 45W brick is for that initial 0-50% burst. For long-term ownership, you want a charger that handles the PPS PDO (Power Data Object) transitions smoothly to manage heat, which is what actually kills battery health over the years. I have been looking at the specs for the Anker 313 Charger 45W and it is specifically tuned for Samsung Super Fast Charging 2.0. Another great option if you have a desk setup is the UGREEN Nexode Pro 65W 3-Port GaN because it provides dedicated high-wattage ports that wont throttle your phone if you plug in a tablet or watch at the same time. Basically, check the fine print on the box for 3.3V-11.0V at 4.05A or 5A in the PPS specs. If it has that specific range, you are golden for the Fold 7.

> I've heard Samsung might stick with 45W PPS support

Hmm, I've had a different experience with these launches. Honestly, I'd consider another option and just stick to the 25W bricks you probably already have... I mean, the actual time saved between 25W and 45W on Folds is usually tiny, like maybe 10 minutes? Not sure but iirc, it's basically not worth the extra cash if you're on a budget. saves you some money for a better case anyway lol

Came here to say the same thing lol. Great minds think alike I guess.

Honestly, I have been trying to figure out all this charging stuff myself since I am getting the Fold 7 too!!! It is like a whole science project trying to get the right wattage. I am usually a DIY kind of person and I love trying to find the best setup without just paying for the most expensive option at the store. I spent so much time testing my old cables and bricks to see if I could save some cash before realizing I just needed to upgrade. Here is what I found works for the DIY route if you want to be sure:

• SAMSUNG 45W USB-C Fast Charging Wall Charger (EP-T4510)
• Baseus 65W GaN5 Pro Charger
• Spigen ArcStation Pro 45W Basically, I just checked the fine print on my chargers at home first and cleaned out my old ports with a little toothpick just to make sure there was no lint blocking the connection before I gave up and bought new stuff. Do you think it is worth even trying the older 25W ones just to see? I am still learning about all the PPS stuff but it seems like doing it yourself and doing your own research is the way to go!!!

Stumbled upon this today and honestly, watch out for the cables first!! The biggest mistake people make is buying a high-wattage brick but using a standard 3A cable. If the cable isnt rated for 5A with an E-marker chip, ur Fold 7 is gonna charge slow even with a 100W charger lol. It's so frustrating!

For your situation, here's what I recommend:
* Third-party: I've had *amazing* results with brands like UGREEN or Anker. They're way more cost-effective and honestly just as reliable.
* Specs: Look for "PPS" support specifically. If the fine print doesn't mention 11V/4.05A, it probably wont hit those top SFC 2.0 speeds.
* Value: Multi-port chargers are fantastic for travel, but just remember the wattage splits if you plug in your watch at the same time.

I mean, I love it when third-party gear actually outperforms the official stuff!! Definitely go with a solid brand but skip the official price tag... good luck!

Yep, this is the way

I am so incredibly excited for the Z Fold 7 launch! Honestly, when dealing with such expensive hardware, I always prioritize absolute compatibility to avoid any weird charging handshake errors. The Samsung 45W Power Adapter EP-T4510 is a fantastic choice because its specifically built for their Super Fast Charging 2.0 protocol and offers the best reliability! For a brilliant third-party option, the Spigen ArcStation Pro 45W GaN Wall Charger is amazing because it uses GaN tech to keep temps low while supporting the full 45W PPS requirement. Keeping the heat down is basically essential for preserving your Folds battery health over time!