TL;DR: Are you charging a laptop too? I'm so happy with Spigen ArcStation Pro GaN 65W Dual Port. I think it's a safer, cheaper PPS pick for ur phone!

Story time: I went through this last year when I upgraded my setup and honestly, the safety aspect is what really matters most to me. I've tried so many chargers over the years and some of those cheap no-name bricks get way too hot when they're trying to handle high-speed PPS. Since you're getting the Pixel 10 Pro XL, you definitely want something that handles heat well so you dont kill ur battery health in six months. Coming back to this, I've found that some multi-port chargers have this annoying habit of power cycling where they cut power for a second when you plug in a second device. That handshake reset can actually be kinda rough on electronics over time. Here are a few I have personally used that feel super safe and reliable:

• Belkin BoostCharge Pro 65W Dual USB-C GaN Wall Charger with PPS
• This one is built like a tank and handles the heat way better than the generic stuff.
• Google 45W USB-C Power Adapter
• If you want the absolute safest bet for the Pixel 10 Pro XL, just go with the official one... it is boring but it works perfectly.
• Sharge Retro 67W GaN Charger with Power Display
• I really love this because the little screen shows the actual wattage so you can see if ur phone is actually hitting those peak PPS speeds. Basically, just look for that 11V/5A PPS rating and you should be golden. Good luck with the new phone!!

For your situation, get Anker 735 Charger GaNPrime 65W or Ugreen Nexode 65W GaN 3-Port Wall Charger. both support PPS and the 65w sweet spot... honestly, ugreen is the better value!

To add to the point above: I think the warning about heat is the most important thing to keep in mind here. Tbh, I have spent a lot of time testing power delivery on my own gear and it is easy to get caught up in the numbers while ignoring the thermals. I actually ran into a weird issue with my current setup where I was seeing major throttling. I realized that the PPS negotiation was constantly resetting because the brick I was using simply could not handle the ambient heat in my office. It was a wake-up call for me. You might want to consider how much airflow the charger is actually getting... dont just tuck it behind a heavy desk or something. Be careful with placing these high-wattage units in enclosed spaces. Basically, make sure to also check your cables for any signs of wear. From my experience, a slightly faulty cable can cause the phone to reject the faster charging profiles entirely as a safety measure. I would suggest being very methodical about how you plug things in and maybe checking the phone temperature after about fifteen minutes. If it feels uncomfortably warm, the speed is likely gonna drop off anyway. Safety first with these expensive batteries...

For your situation, I would suggest going with a 65W brick! Even if the phone caps at 45W, the extra wattage is actually AMAZING for ur tablet. You definitely need USB-PD 3.1 with PPS... i think it needs 11V at 4A?

• Check out Baseus multi-port chargers
• Satechi has some sleek GaN options
• Try the official Google charger Basically, without PPS it wont hit peak speeds, right? Cheers!

Honestly, you are definitely on the right track looking at PPS support because that is what really makes or breaks the charging speed for Pixels. Before you decide on a specific brand tho, I have a couple questions to help narrow it down. Are you looking for something ultra-portable that you can throw in a bag every day, or is this gonna mostly live plugged into a wall at home? Also, do you have a preference for brands that focus on super compact GaN tech versus ones that might be a bit bulkier but usually stay cooler to the touch? I have noticed some brands definitely prioritize size over heat management and that can matter depending on where you are plugging it in.