honestly, i feel u. finding the right brick for the 10 Pro XL is kinda annoying cuz of the PPS requirement. i've been using these and i'm really satisfied: - Anker 313 Charger (Ace, 45W) - super cheap (~$25) and compact.
- Ugreen Nexode 45W GaN Dual USB C Charger - great if u need two ports. tbh just grab the Anker one. it hits full speeds and i've had no complaints. cheers!

Yo! Jumping in here because the charging specs for the Pixel 10 Pro XL are actually kinda tricky. Basically, to get those top speeds, you gotta look at the PPS (Programmable Power Supply) range. Most chargers claim 45W Power Delivery, but if they dont support the specific 5A PPS protocol, your Pixel will definitely throttle down to like 27W or less. It is SO annoying when you buy a premium brick and it still takes forever to charge lol. Here is what I recommend for technical stability and speed: • Google 45W USB-C Power Adapter - Honestly, this is the safest bet. It is guaranteed to have the exact PPS profile the 10 Pro XL needs. It is not the smallest GaN out there, but it literally NEVER overheats in my experience.
• Anker 713 Charger (Nano II 45W) - If you want super compact, this is it. It uses GaN II tech, so it is tiny but stays cool. Just make sure youre using a 5A rated cable or it wont hit the peak wattage!!
• Spigen ArcStation Pro 45W Wall Charger - This one is lowkey underrated. Its very stable and usually a bit cheaper than the big name brands while still being GaN.
• Satechi 165W USB-C 4-Port GaN Charger - If you travel with a laptop too, this is a beast. It has dedicated PPS ports that wont drop wattage when you plug in other gear. Just a heads up... be careful with the cables. If you use a basic 3A cable, the brick will cap the output even if it is a 45W charger. You definitely need a 100W/5A cable to be safe. Good luck!

Seconding the recommendation above! Honestly, safety is the biggest thing for me after using Pixels for years. I'm super satisfied with the Belkin BoostCharge Pro 65W Dual USB-C GaN Wall Charger with PPS. It stays cool even at max speeds which is key for long-term battery health. - Prioritize chargers with built-in thermal protection to avoid overheating.
- Make sure your cable is 5A rated too! Works well tho, gl!

> I'm looking for something reliable that won't overheat, ideally a compact GaN charger that's easy to toss in my bag. To add to the point above: I've spent way too much time staring at power meters over the years. Last year, I thought I had the perfect setup for my daily driver, but after about six months of heavy use in a hot office, the port started acting flaky because the brick I used didn't handle heat dissipation well during those long PPS handshakes. It's not just about hitting 45W for five minutes; it's about what happens thirty minutes in when the thermal management kicks in. You really might want to consider the trade-offs with those super tiny GaN bricks. They look cool in a bag, but the smaller the surface area, the harder it is for them to shed heat. I would suggest looking closely at the actual thermal efficiency ratings if you can find them. I've seen some bricks drop their voltage significantly once they hit a certain internal temp to protect the circuits, which basically kills your fast charging anyway. Are you planning on using this mostly at a desk where it has airflow, or is it going to be tucked behind a couch or in a bag while charging? Also, what's your priority—absolute smallest size possible or something that runs cool to preserve your battery's long-term health?

Late to the party but in my experience, those technical protocols mentioned in the specs are definitely the secret sauce for your new phone. You dont always gotta pay a premium for the big names tho, tbh. I've had reallyyy good luck with Spigen lately. I think their GaN bricks are usually way more affordable and they've been super reliable for me. Just make sure it supports that 5A range!

I definitely agree that prioritizing thermal safety is the way to go here. As a bit of a DIY hardware geek, I tend to be pretty cautious about what I plug into a brand new phone. Honestly, a lot of people just trust the labels, but if you want to be an expert about it, you really should pick up a simple USB-C voltage and amperage meter. It is the only way to verify that the handshake is actually pulling the correct 5A PPS profile without just guessing based on the charging icon. If you want some rock-solid alternatives that I have personally tested for stability:

• Satechi 165W USB-C 4-Port GaN Charger
• Sharge Retro 67W GaN Charger
• Plugable 140W USB-C GaN Power Adapter The Sharge one is especially cool because it has a tiny display that shows the live wattage, which is superrr helpful for making sure your cable is actually up to the task. Just remember that even the best brick is useless if your cable does not have an E-Marker chip for high-current delivery. Basically, do your own testing to ensure everything stays cool and efficient!

Commenting to find later