The Anker MagGo Power Bank (10K) is a top pick for iPhone 17 Pro, offering 15W Qi2 fast charging and 10,000mAh capacity.

According to Smartphone Reviews, this model delivers 15W Qi2 power, doubling older MagSafe speeds, and can fully charge your iPhone twice with juice left over, all for under $40.

Get the full breakdown and testing details here:

Just pre-ordered my iPhone 17 Pro and after researching extensively, I went with the Anker MagGo power bank - it's Qi2-certified and charged my iPhone 15 from 5% to 60% in just over 45 minutes, with enough juice left for an additional 70% refill. The small display shows remaining charge and the kickstand is super sturdy for hands-free use in both portrait and landscape

Just got this one, love it. Anker Power Bank, 20,000mAh Travel Essential Portable Charger with Built-in USB-C Cable, 3-Port 87W Max Fast Charging Battery Pack

For most people, honestly a good 10,000mAh power bank with 30W+ USB-C PD is plenty. A 10,000 mAh power bank for iPhone with a 30 to 40 W USB-C PD port fits a workday. A short 0.5 to 1 m cable keeps top-ups quick and neat.

The iPhone 17 Pro has 12 GB of RAM and an enormous leap in battery life compared to previous models, so you probably won't need to charge as often anyway. I've been using an Anker 10K with 30W PD and it easily gets me through long days when I forget to charge overnight.

Don't overthink it - any reputable brand with 30W+ PD will work great!

I totally agree with the point about 10,000mAh being the sweet spot for a regular day - honestly, anything bigger just feels like carrying a brick in your pocket!!! Tbh I'm still a bit of a beginner with all these tech specs but here's what I've learned from my current setup: - I once bought a random one because the price was right, but it got so hot while charging that I actually got scared it would hurt the battery - now I always look for what people are saying in community threads first instead of just trusting the box.
- The size really matters too... if the power bank is too chunky it's basically impossible to hold the phone and charge at the same time. I'm pretty worried about that since the new phones are already big enough.
- Has anyone noticed if some brands are better with the cable connection??? The one I have now constantly disconnects if I even move the phone an inch, which is what I'm trying to avoid with the 17 Pro. Basically I'm just playing it safe - don't want to fry an expensive new phone with something sketchy!!!

Just wanted to say thanks for everyone chiming in. Super helpful discussion.

+1

Re: "Same setup here, love it" - honestly i wouldnt just follow what everyone else is doing without checking the hardware specs yourself. i'm not 100% sure about the exact voltage limits on the 17 Pro yet but iirc apple is getting way pickier about power delivery standards. be careful with anything that feels too light for its capacity. i usually take a usb-c voltmeter to mine just to make sure the ripple voltage isnt gonna fry the logic board over time. if you’re tech-savvy at all, i would suggest getting a power tester to see what’s actually happening under load. might want to consider the cable quality too since a bad wire can mess up the handshake and overheat the port. just my two cents from messing around with diy electronics... better safe than sorry with a thousand dollar phone.

I saw this thread earlier but just now getting around to responding. Tbh I went through a bunch of different setups before finding what actually works for me when I am out all day. I used to think more capacity was always better but carrying a heavy block in my jeans got old really fast (at least thats what worked for me).

• I found that a slim 10k unit is the best middle ground for my daily commute
• the one I got has a built in cable which sounds like a gimmick but it saves so much space
• magnetic charging is cool for convenience but it generates way more heat than a direct wire The main thing I learned is that spending the full 50 bucks on a quality mid-size unit is way better than getting a massive 30,000 mAh cheapo that feels like a literal brick. My current setup keeps the phone light and I dont have to worry about frying the internals. Idk, just look for something with a solid warranty and ur probably good to go.

Following

Building on the earlier suggestion, that 10,000mAh capacity really is the peak for daily carry. Honestly, the thread has covered the bases well—balancing the Qi2/MagSafe convenience with raw charging speed. But for me, it always comes back to the internals and how the power bank talks to the iPhone.

• Thermal management is the silent killer for battery health.
• Solid circuit protection is non-negotiable for a 17 Pro.
• Port quality matters more than most people realize. I've tested so many of these and the cheap ones always skip on the safety regs. Since the 17 Pro is gonna be a beast, you want something that matches that quality. Ngl, id rather have a reliable 10k pack that lasts two years than a 20k brick that dies in two months.

Same setup here, love it

For iPhone 17 Pro, I'd recommend looking at MagSafe-certified or Qi2-certified power banks that provide 15W fast-charging, which is twice the speed of standard magnetic wireless chargers. The Baseus 5K Qi2 Picogo Power Bank with Kickstand is slim and sticks magnetically to your phone while wirelessly charging at 15W speeds. Most baseline power banks start at 5,000mAh capacity for close to one full iPhone charge, while 10,000mAh models offer more charges but are larger and heavier.

Anker PowerCore III. I've used mine for years. Fast charging, durable. Be careful about advertised capacity vs. actual usable power; test it!